Fully Automatic Cable Laser Stripping and Tinning Machine

• Customization: Available
• After-sales Service: Online Support
• Driven Type: Electric
• Model NO.: JWD-JGZX01
• Condition: New
• Certification: CE
• Warranty: 1 Year
• Automatic Grade: Automatic
• Power: 2000W
• Power Supply: 220V/50Hz
• Cutting Length: 20mm- 600mm
• Cutting Accuracy: 1mm±0.1mm
• Stripping Length: 0mm-15mm
• Transport Package: Plywood Box
• Specification: 3000mm*1200mm*1950mm
• Trademark: Better Tech
• Origin: China
• HS Code: 8444009000
• Production Capacity: 50000sets/Year

Product Description

Product Description

 

Model	JWD-JGZX01
Motor	Mitsubishi + Inovance servo motor
Power	2000W
Power supply	220V/50HZ
Function	front and rear laser stripping, cutting, front and rear twisting, front and rear tinning
Cutting length	20mm- 600mm
Cutting accuracy	1mm±0.1mm
Stripping length	0mm-15mm
Stripping tolerance	about±0.1mm
Feed quantity	1-8PCS at the same time
Defective rate	less than 0.1%
Wire type	silver-plated wire, aircraft wire, military wire and other special wires
Laser type	Dawei 30W, CO2 laser/air cooling
Laser frequency	1KHz-25KHz
Laser wavelength	10.6um
Cutting accuracy	±0.1mm
Cutting speed	0-500mm/S
Power requirement	AC220V±10% 16A
Supported graphic formats	DST, PLT, AI, BMP, DXF, JPG
Supported software	CORELDRAW PHOTOSHOP AUTOCAD AI
Applicable materials	FF soft cable, Teflon cable, aluminum foil Mylar ultra-fine coaxial cable, etc.
Usage environment	clean and dust-free, no vibration source
Air pressure	5Mpa-7Mpa
Control mode	inch, single action and automatic (continuous)
Vulnerable objects	blades
Accessories	2 sets of blades, 1 set of tools, 1 manual
Appearance size	3000mm*1200mm*1950mm
Weight	780Kg

Fully Automatic Cable Laser Stripping and Tinning Machine

The fully automatic laser stripping, wire cutting and tinning machine uses CO2 laser to cut the outer layer of the wire, and has unique advantages in processing high-end wires. Since CO2 laser cutting only works on plastics and not on conductors, it has unique advantages. Using CO2 laser to cut the outer layer of the wire, the incision is neat and the conductor is not damaged. It has high efficiency, high output, very low defective rate and is easy to operate. Therefore, the fully automatic laser stripping, wire cutting and tinning machine has become the first choice for cutting high-end wires.

 

 

Features:

 

○ High quality, low defect rate during production

○ High output, effectively reducing production costs

○ High reliability, high stability

○ Customized according to customer needs, simple operation

○ A wide range of applicable materials: chlorides of ethylene polymers, glass fiber, polyester, polyester film, fluoride, nylon, polyethylene, silicone resin, other insulation layers of different hardness or high temperature, etc., suitable for most wires.

○ Laser stripping ensures that the wire conductor is not damaged. CO2 only works on the plastic coating of the wire and has no effect on copper metal. This solves the problem of stripping wires with high requirements, high difficulty and special requirements.

 

Detailed Photos

 

Application

 

BETTERTECH supplies full range wire stripping machines series cover cross section area from 0.1mm² to 300mm². No matter single core wires or multi core cables, our different wire stripping machine can finish cutting, two ends full stripping, middle stripping, one end stripping, half stripping and following twisting procedures.

Not all the models we would upload on website, if you need the further information, (price, working capacity, different procedures) of wire stripping machine, Any requirements please contact us, we are ready to help.

Recommend Products

Automated Wie Cutting and Stripping Machine

○ Suitable for processing shielded wires, multi-layer cables, PVC wires, etc.
○ Middle stripping function
   Multi-segment middle stripping, arbitrary interval, arbitrary stripping length, up to 50 segments.
   Multi-segment middle stripping, same interval, same stripping length, unlimited number of stripping segments.
○ Optional: MES system, Internet of Things system, fixed-point inkjet function, external auxiliary equipment alarm;
○ User-friendly system, intuitive operation via 7'' color touch screen;
○ Modular interface, convenient for linking accessories and peripheral equipment;
○ Modular design, future upgradeable;
○ Accept non-standard customization.

Fully-auto Wire Two Ends Crimping Machine

○ A multi-functional and fully automated machine that can process wire cutting, wire stripping and crimp terminal at one end or both ends.

○ Advanced software and visual touch screen makes the machine easy to operate.

○ Robust, durable and stable. The raw materials of this machine have been heat treated, blackened and hard oxidized.

○ Using two motors to send wires, avoiding the problem of different lengths of wires and indentation of wires.

○ Can be equipped with horizontal and vertical molds.

Wire Stripping and Rubber Seals Crimping Machine

○ The stripping length can be adjusted via data sets, and the wire seal insertion depth is adjusted according to the data of the glue position between the stripping port and the wire seal.
 

○ The crimping depth can be adjusted according to the position of the top wire.
 

○ The stripping slide table is driven by a screw rod, stripping mechanism is driven by a motor plus screw to ensure accurate stripping length.
 

○ The waterproof wire seal feeding structure is simple and easy to replace, which meets the requirements of customers with many products and varieties.
 

○ The machine is easy to operate, stable in quality, and most work is concentrated in one workstation.

 

Wire Two Ends Crimping and Housing Assembly Machine

○ Function: wire cutting, stripping at both ends, crimping at both ends, inserting housing at one end, inserting housing at both ends, holding the wire in reverse, discharging good/defective products separately, automatic discharging.
 

○ Realize automatic detection of defective products, automatic discharge of defective products and finished products, realize continuous, efficient and high-quality automation of products, and realize 24-hour unsupervised machine automation production process.

○ Reduce labor and manufacturing costs.

 

Company Profile

 

Hefei Better Technology Co., Ltd., founded in 2008, is specialized in the production of all types wire harness processing & cutting machine, such as semi-automatic terminal crimping machine, fully automatic terminal crimping machine, wire stripping and terminal crimping machine, connector crimping machine, cable lug crimping machine, super mute terminal crimping machine, pneumatic terminal crimp machine, hydraulic terminal crimp machine, cable winding tie machine, laser welding & cutting machine, ultrasonic welding&cutting machine, etc.

We're one of Chinese leading manufacturers in wire/cable harness processing industry. Our professional engineering team has developed and manufactured a variety of machines from semi-automatic to fully automatic, covering all categories of wire harness processing & cutting industry. Our premium quality and attentive post-sale service have earned us a good reputation in global wiring harness industry.

BETTER TECH Professional manufacturing expert in wire harness processing equipment.
Whether for crimping, tinning, sealing, shrinking tube, number tube assembly, plastic sheathing shell assembly, or any other cable harness processing needs, our wire harness processing machines can satisfy all your different processing procedures in your project. Our engineering team can also help you design multiple functions in one equipment for you based on your requirements. What's more, we also support free sample testing. Welcome to inquire us online, we'll recommend you suitable model and quote you in detail.

Packaging & Shipping

Certifications

FAQ

Q1: Are you manufacturer or trading company?
A: We are a professional manufacturer, nearly 20 years of production experience.

Q2: Can I have your quotation?
A: Of course, please provide us the information of the machine you need, such as size,
application, materials and so on.

Q3: Do you have overseas service? How to provide after-sales service?
A: Yes, we normally help our customers to solve the problems through phone, Email, skype, internet video.

Q4: How long is the equipment warranty?
A: We offer one year guaranteen for main parts, within one year, if component of themachine broken, we freely offer the component, but the delivery fee should be paide by client.

Q5: What is the delivery lead-time?

A:Normally 5-30 days upon receipt of your orders and its deposit.

 

Q6: What is your payment terms?

A: We accept L/C, T/T, D/P, Western Union and PayPal. Detailed can be negotiated.

Q7: Can you customize for us? Can you OEM/ODM for us?

A: Yes.

Q8:Can I get a discount?

A:Yes, for the yearly order quantity of more than 5 sets, please contact us to get the best price.